ZyXEL Communications NBG6616 User Manual page 152

Figure 99 Bandwidth Management Rule Configuration: User-defined Service
The following table describes the labels in this screen.
Table 67 Bandwidth Management Rule Configuration: User-defined Service
LABEL
BW Budget
Destination Address
Start
Destination Address End
Destination Port
Source Address Start
Source Address End
Source Port
Protocol
Apply
Cancel
See Appendix C on page 228
Chapter 21 Bandwidth Management
DESCRIPTION
Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum
or minimum bandwidth allowed for the rule in kilobits per second.
Enter the starting IP address of the destination computer.
The NBG6616 applies bandwidth management to the service or application that is
entering this computer.
Enter the ending IP address of the destination computer.
The NBG6616 applies bandwidth management to the service or application that is
entering this computer.
This is the port number of the destination that define the traffic type, for example
TCP port 80 defines web traffic.
Enter the starting IP address of the computer that initializes traffic for the
application or service.
The NBG6616 applies bandwidth management to traffic initiating from this
computer.
Enter the ending IP address of the computer that initializes traffic for the
application or service.
The NBG6616 applies bandwidth management to traffic initiating from this
computer.
This is the port number of the source that define the traffic type, for example TCP
port 80 defines web traffic.
Select the protocol (TCP, UDP, BOTH) for which the bandwidth management rule
applies.
If you select BOTH, enter the protocol for which the bandwidth management rule
applies. For example, ICMP for ping traffic.
Click Apply to save your customized settings.
Click Cancel to exit this screen without saving.
for commonly used services and port numbers.
NBG6616 User's Guide
152