Wireless Security: Wpa2-Psk - ZyXEL Communications NBG6616 User Manual

Figure 13 Wireless Security: No Security
The following table describes the labels in this screen.
Table 9 Wireless Security: No Security
LABEL
Wireless
Network Name
(SSID)
Security Mode
Exit
Back
Next

3.5.2 Wireless Security: WPA2-PSK

Choose WPA2-PSK security in the Wireless Security screen to set up a password for your wireless
network.
Chapter 3 Connection Wizard
DESCRIPTION
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
Note: The setting here applies to both 2.4 GHz and 5 GHz wireless radios.
If you change this field on the NBG6616, make sure all wireless stations use the same SSID
in order to access the network.
Select a security level from the drop-down list box.
Note: The setting here applies to both 2.4 GHz and 5 GHz wireless radios.
Choose No Security to have no wireless LAN security configured. If you do not enable any
wireless security on your NBG6616, your network is accessible to any wireless networking
device that is within range.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
NBG6616 User's Guide
27