ZyXEL Communications NBG6616 User Manual page 83

Figure 49 Network > WAN > Advanced
The following table describes the labels in this screen.
Table 28 Network > WAN > Advanced
LABEL DESCRIPTION
Multicast Setup
Multicast Select IGMPv1/v2 to enable multicasting. This applies to traffic routed from the
WAN to the LAN.
Select None to disable this feature. This may cause incoming traffic to be dropped or
sent to all connected network devices.
Auto-Subnet Configuration
Enable Auto-IP- Select this option to have the NBG6616 change its LAN IP address to 10.0.0.1 or
Change mode 192.168.1.1 accordingly when the NBG6616 gets a dynamic WAN IP address in the
same subnet as the LAN IP address 192.168.1.1 or 10.0.0.1.
The NAT, DHCP server and firewall functions on the NBG6616 are still available in this
mode.
Apply Click Apply to save your changes back to the NBG6616.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 10 WAN
NBG6616 User's Guide
83