Table of Contents
Advertisement
Useful Information
DECT repeater
Problem
The unit does not work.
While talking using the
handset, sound cuts in
and out.
A repeating tone is heard
while talking using the
handset.
or
The
indicator
continues to light amber
and the
indicator
flashes green.
52
Cause/solution
R When the indicators do not light, the AC adaptor is not
connected properly. Check the connections.
R When the indicators do not light green, move the unit closer to
the base unit.
R Registration may have been cancelled. Deregister the unit, then
re-register.
Deregister:
1
Unplug the AC adaptor, then press and hold MPROGRAMN.
2
While pressing and holding MPROGRAMN, re-connect the
AC adaptor.
3
Keep holding to press MPROGRAMN for about 10 seconds
until the
release MPROGRAMN.
R The
and
then only the
R If the
MPROGRAMN, deregistration failed. Deregisterthe unit
again.
Re-register:
1
DECT repeater: Unplug the AC adaptor.
2
Base unit: Press and hold M
the registration tone sounds.
R The next step must be completed within 90 seconds.
3
DECT repeater: Connect the AC adaptor, then wait until
the
indicator and
4
Base unit: To stop the registration tone, press M
R The handset is out of range. Move the handset closer to this
unit.
R MPROGRAMN was pressed. The unit is in programming mode.
To exit, press MPROGRAMN again. Do not press MPROGRAMN,
except when deregistering the unit.
indicator stops flashing and lights red. Then
indicators light amber for a moment
indicator flashes red.
indicator flashes green after releasing
N for about 5 second, until
indicator light green.
N.
Advertisement
Table of Contents
