Table of Contents
Advertisement
R Please contact your service provider/
telephone company for details and
availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or muted
for a short period of time. This is not a fault
of the product as these events are normal.
R The tones are generated by your service
provider/telephone company.
For Call Waiting or Call Waiting
Caller ID service users (for New
Zealand)
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company. This feature
allows you to receive calls while you are
already talking on the phone. If you receive a
call while on the phone, you will hear a call
waiting tone. If you subscribe to both Caller
ID and Call Waiting with Caller ID services,
the 2nd caller's information is displayed after
you hear the call waiting tone on the handset.
1
Press MECO/RN to answer the 2nd call.
2
To switch between calls, press MECO/RN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Category ringer tone
This feature can help you identify who is
calling by using different ringer tones for
different categories of callers. When adding an
entry to the phonebook, you can assign it to
the desired category (page 20). When a call is
received from a caller assigned to a category,
the ringer you selected for that category rings
after caller information is displayed.
If you select "Default Ringer", the unit
uses the ringer tone you selected on page 25
when calls from this category are received.
The default setting is "Default Ringer".
1
(left soft key) a
2
MbN: "Category" a
3
MbN: Select the desired category. a
4
MbN: Select the current setting of the
category ringer tone. a
5
MbN: Select the desired ringer tone. a
6
M
N
Caller list
Important:
R Only 1 person can access the caller list at a
time.
R Make sure the unit's date and time setting
is correct (page 15).
Viewing the caller list and calling
back
1
MFN ( )
2
Press MCN to search from the most recent
call, or press MDN to search from the
oldest call.
R You can see the detailed information
about the caller by pressing
when in multiple display mode.
3
To call back, press M
To exit, press M
Note:
R If the entry has already been viewed or
answered, " " is displayed, even if it was
viewed or answered using another handset.
R If the call matches an entry in the call
barred list, the number is logged with
(page 28).
R If you do not want to dial the area code
when making calls from the caller list, you
can store the area code which you want the
unit to delete automatically (page 29).
Caller ID Service
N.
N.
33
Advertisement
Table of Contents
