Table of Contents
Advertisement
Installation for DECT
repeater
By installing this unit, you can extend the
range of your phone system to include areas
where reception was previously not available.
The unit extends the range in all directions,
allowing several floors to be covered.
Important:
R This unit is an accessory unit for use with
Panasonic Digital Cordless phones.
R This unit is pre-registered to the base unit.
For best performance
Placement
R Install the unit within base unit range in an
indoor environment. We recommend
installing the unit in a raised position (such
as on a wall).
R Avoid positioning the unit close to objects
that will interfere with reception, such as
thick walls, radiators, metal shelving, etc.
R For maximum distance noise-free
operation, place the unit away from
electrical appliances such as TV, radio,
personal computer, or other telephone
equipment.
R Keep an appropriate distance from the
base unit to maximise the range of your
phone system. Find the appropriate
location by checking the
indicator lights red or amber, re-position
this unit in a place where the
lights green.
Base unit
DECT repeater
DECT repeater range
indicator. If the
indicator
Base unit range
Handset
Controls
A
B
indicator
indicator
ID indicator
MPROGRAMN
indicator and
indicator
Status
Meaning
Green
Signal strength of the base
(On)
unit is strong.
Amber
Signal strength of the base
(On)
unit is weak.
Red
Out of base unit range.
(On)
Off
R The unit is not being used.
R The power is off.
indicator
Status
Meaning
Green
Within base unit range. The
(On)
unit is ready for use.
Green
Handsets are communicating
(Flashing)
with the base unit through this
unit.
Red
Out of base unit range.
(On)
Red
The unit is not registered to
(Flashing)
the base unit.
Off
The power is off. (AC adaptor
is not connected properly.)
DECT repeater
C
indicator
43
Advertisement
Table of Contents
