Table of Contents
Advertisement
R The range of the base unit is limited
during a power failure. Please use the
handset close to the base unit.
Making a call using the redial list
n When only 1 handset is registered:
1
Lift the handset.
2
or MEN (
3
MbN: Select the desired phone number.
4
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls. For the
operation, please see "Making a call using
the redial list", page 16.
Making a call using the handset
phonebook
n When only 1 handset is registered:
1
Lift the handset.
2
3
MbN: Select the desired entry.
4
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls. For the
operation, please see "Finding and calling
from a phonebook entry", page 20.
)
Making/Answering Calls
Answering calls during a power
failure
n When only 1 handset is registered:
1
When the unit rings, keep the handset
on the base unit and press M
M N.
R Speakerphone is turned on.
2
When you finish talking, press
M
N.
n When 2 or more handsets are registered:
When the unit rings, use a handset which
is not supplying power to the base unit.
For the operation, please see "Answering
calls", page 16.
R Do not use or lift the handset which is
placed on the base unit during power
back-up mode.
Note:
R During a call with the handset placed on
the base unit (power back-up mode),
the call may be disconnected if you
touch the handset. In such case, try to
call back.
R The range of the base unit is limited
during a power failure. Please use the
handset close to the base unit.
N or
19
Advertisement
Table of Contents
