Table of Contents
Advertisement
Programming
Sub-menu 1
*1
Area Code
*1
Call Restrict
*10
Auto Talk
Line Setup
*1, *14
Privacy Mode
*1
Base Unit PIN
*1
Repeater Mode
Register
Power Failure
Language
*1
If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*2
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3
This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual".
(Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*4
Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*5
If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*6
The preset melodies in this product are used with permission of © 2011 Copyrights Vision
Inc.
*7
You can set the wallpaper to display with or without date and time by pressing
default setting is with date and time displayed.
*8
You can set the handset display backlight while on charge.
– "On": Backlight is on (dimmed).
– "Off": Backlight turns off after 10 seconds of charging.
26
Sub-menu 2
–
–
–
*1, *11
Recall/Flash
–
–
–
Register H.set
Cancel Register
–
Display
Settings
–
–
1: On 0: <Off>
0: 900 msec.
1: 700 msec.
2: <600 msec. >
3: 400 msec.
4: 300 msec.
5: 250 msec.
G: 200 msec.
#: 160 msec.
6: 110 msec.
7: <100 msec.>
8: 90 msec.
9: 80 msec.
1: On 0: <Off>
<0000>
1: <On> 0: Off
–
*2
–
1: <Auto> 0: Off
<English>
Code
#255
29
#256
29
#200
16
#121
17
*12
*13
#194
–
#132
30
#138
44
#130
30
#131
30
#152
18
#110
14
. The
Advertisement
Table of Contents
