Lexmark 7100 Series Service Manual page 17

4409-XXX
Buttons
Speed Dials
(5—99)
Redial/Pause
Functions
This button gives access to additional speed dial
numbers. Speed dials #5—#79 are single entry and
speed dials #80—#99 are group entries. Single entries
contain only one phone number. Group entries contain
up to five different phone numbers. The speed dial
names and numbers can be programmed by using
either the control panel or the host software.
Pressing this button displays the speed dial #5 and
upward name and phone number. You can cycle
through the speed dial in multiple ways:
1. Repeated pressing of Speed Dials (5—99) button
2. Using the arrow keys
3. Using the keypad to type the two digit number
Pressing the speed dials (5—99) button while in the
copy or scan mode will automatically switch to fax
mode and display speed dial selection #5.
When pressing this button while the machine is in fax
mode, the machine will immediately dial the number
that was last entered. The fax is sent using the current
settings.
Pressing this button after you have already started
entering a number inserts a "," into the number. When
the machine dials this number, the "," results in a three
second pause before sending the next number. This is
useful if needing to wait for an outside line or waiting
for prompts in an automated answering system.
If this button is pressed while in copy or scan mode,
the machine will automatically switch to fax mode and
initiate the proper response for redial/pause.
General information
1-7