Tray Heaters; Upper Tray Heater - Ricoh K-C1 Service Manual

TRAY HEATERS

1.11 TRAY HEATERS

1.11.1 UPPER TRAY HEATER

B039I020.WMF
[E]
B039I121.WMF
1. Remove the 1st tray cassette [A].
2. Remove the rear cover (☛ 3.3.1).
3. Remove the high voltage power supply board [B] with bracket (5 screws and 3
connectors).
4. Pass the connector [C] through the opening [D] and install the tray heater [E] (1
screw).
5. Install the relay cable [F], as shown.
6. Clamp the cable with the clamp [G].
7. Reinstall the 1st tray cassette, power pack, and rear cover.
[A]
[C]
[D]
1-22
20 February, 2001
B039I909.WMF
[G]
[F]
B039I126.WMF
[B]