Ricoh K-C1 Service Manual page 140

USING SERVICE PROGRAM MODES
7
Mode Number/Name
908* Display – Developer Counter
911* Display - ID Sensor Error Counter
912 Reset - ID Sensor Error Counter
991* Display - Timer Counter
Function/[Setting]
Display the total number of prints made since the last
Developer Initialization (SP2-214).
Note that this counter does not double count, even for A3
and 11" x 17". Developments are counted up at paper
exit.
Displays the total number of logged ID sensor errors.
For the error analysis procedure, ☛ 5.1.14 ID Sensor
Error Analysis.
Resets the ID sensor error counter.
[0 = No / 1 = Yes]
After selecting "1", press the Original Type key and the
OK key (or ' key) at the same time to execute the reset.
If the reset is successful, the display shows "Action
completed." If the reset fails, the display shows "Error!!!".
Displays the total ON time for the machine.
5-30
20 February, 2001