EverFocus EMV401 User Manual page 88

Note: Whether the following functions marked with a "*" will be enabled or not depends
on the connected IP camera. If the IP camera doesn't have the any one of these functions,
the function will not be enabled. The setting options will also vary according to the IP
cameras you selected. For more details, please refer to your IP camera's user's manual.
* Profile Setting: Select Day Mode or Night Mode. It is designed for user to easily have a best
image quality of the IP camera in the daytime and night time. (IP camera only)
* Profile Mode: Select a desired profile mode ( Vivid/High Contrast, Standard, More Detail and
User Define) to adjust image quality. (IP camera only)
* Flicker: Check the box to enable the Flicker function. Please enable this function only if flicker
artifacts are observed. (IP camera only)
*【Exposure Settings】 This setting is used to adapt to the amount or type of light used by the
camera.
* Mode:
ALC (Shutter Priority): Selecting ALC (Automatic Light Control) allows the camera circuitry to

either take bright spots more into consideration (peak), bringing out detail in bright areas, or
less into consideration (average) bringing out detail in shadows. ( IP camera only)
AES (Iris Priority): Selecting AES (Auto Electronic Shutter) disables the Shutter setting below

this setting. In this mode, the camera measures the light level and decides whether it needs
more or less light and then automatically adjusts the shutter speed accordingly. You can
further adjust the Iris (P-Iris) value. ( IP camera only)
Auto: Selecting Auto for the camera to automatically adjust the Iris and Shutter based on the

measured light level. ( IP camera only)
* Shutter: If enabled, this setting lets you set the shutter speed yourself (measured in fractions of a
second). ( IP camera only)
* Flickerless: The function is only activated if you select Auto in the Mode field. Choose between
OFF, 50HZ, 60HZ, 50HZ (High Luminance) or 60HZ (High Luminance). ( IP camera only)
Brightness: Move the bar to adjust the brightness.
Contrast: Move the bar to adjust the contrast. (The function can only be used when the camera
has the contrast function)
Color: Move the bar to adjust the color.
Sharpness: Move the bar to adjust the sharpness.
Save: Click to save the settings.
EMV401 / 801 / 1601 Hybrid Mobile DVR
79