EverFocus EMV401 User Manual page 170

8. Shortcut for Preset 1 ~ 9:
a. Click digit 1 ~ 9 button without clicking any other buttons.
b. The camera will seek that Preset Position.
9. To delete a Preset Position (if supported by the camera):
a. Click the Preset button.
b. Click the desired Preset number.
c. Click the Delete button.
10. To operate the Auto Pan function, click the Auto Pan button.
11. To operate the Pattern function, click the Pattern button. The Pattern is the "0" Tour in
EverFocus and Pelco PTZ cameras.
12. To operate the Tour function:
a. Click the Tour button.
b. Click the desired Tour number.
c. Click the Go button.
13. To remove a pre-configured Tour (if supported by the camera):
a. Click the Tour button.
b. Click the desired Tour number.
c. Click the Delete button.
14. To start the auto-tracking function, click the Track button.
15. To start tracking an object on the screen, click the Object button. When the object selection
box displays on the screen, click to select an object to start auto tracking. Once the PTZ camera
loses track of the object, the camera will return to the auto tracking start point. Please select
forward position in the object movement path to get better tracking result.
Click C to clear the entered number in the Number Box.
Note: Before start using the Auto Pan, Pattern, Tour, Tracking and Object functions, you
have to configure the related settings for the connected PTZ cameras. Please refer to 6.1.3
PTZ or the User's Manual of your PTZ cameras.
Control PTZ Camera over EKB200 Keyboard:
When using an EKB200 keyboard, you need to click the Connect button on the PTZ Control Panel.
Please note that you need to configure the PTZ control functions and define the function for each
control key on the keyboard before controlling the PTZ camera over the EKB200 keyboard (see
6.1.3 PTZ and 6.8.6 EKB200). For information about the installation of the EKB200 keyboard,
please refer to your EKB200 keyboard User's Manual.
EMV401 / 801 / 1601 Hybrid Mobile DVR
161