Table of Contents
Advertisement
Alarm Output: This will transmit a signal through the alarm output relay. It can be set to
either "NONE" (not active), "1" (active) or "2" (active).
Output Type: Output action when alarm is triggered.
Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will be continuously active until user presses the "Enter" key or
resets the alarm remotely.
Transparent: Alarm output remains active until event ends.
Trans+Timeout: Alarm output continues until event ends, then continues for the set
time duration.
Timeout Duration: The amount of time the buzzer sounds when GPS is lost. Duration
selectable from 1 to 150 seconds.
EMV401 / 801 / 1601 Hybrid Mobile DVR
92
Advertisement
Table of Contents
