Table of Contents
Advertisement
3. General Operation
There are two ways to control the OSD menu of the EMV401 / 801 / 1601: with a Mouse or the
supplied handheld IR Remote Control. For details on the IR remote control, please refer to
Appendix E, IR Remote Control. This chapter will discuss the basic operations using the mouse.
3.1 USB Mouse Operation
3.1.1
How to Select a Channel / Enable Audio Out
1.
In the Live View window, you can select a channel by clicking once on the desired
channel screen. The selected screen will be highlighted by a red frame.
2.
Double clicking on a channel screen will display full screen for this channel.
3.
To enable audio out, click the Audio Icon
Audio Output function to the desired channel or disable the Audio Output function.
3.1.2
OSD Root Menu
1.
Right-click the mouse, the OSD Root Menu window appears.
2.
Click on any icon to enter to the setup menus.
3.
Click the
button on the top-right corner or right-click to close the OSD Root Menu.
EMV401 / 801 / 1601 Hybrid Mobile DVR
at lower-left side of the screen to switch the
31
Chapter
3
Advertisement
Table of Contents
