THROITLE CABLE ADJUSTMENT
Measure the throttle cable play by turning
the throttle
grip.
The throttle grip should
have 2
-
4 mm (0.08 - 0.16 in)
play.
CLUTCH
Inadequate throttle cable play can cause engine
speed
to rise suddenly when you turn the han
dlebars. This can lead to loss of rider control.
Adjust the throttle cable play so that engine idle
speed does not rise due to handlebar move
ment.
1.
Loosen the lock nut
CD.
2
.
Adjust the
cable
play
by
turning
The clutch release mechanism of this motor
adjuster
~
in or out to obtain the
cor
cycle is operated by hydraulic pressure
.
No
rect
play.
adjustment is needed on the clutch release
·!
3.
After adjusting the play tighten the lock
system because the system is self-adjusl
·
nut.
ing. However,
inspect the following each
time before riding to make sure that the
sys
tem is in good condition and functioninq
properly.
6-31
6-30