Adjusting The Sound - Loewe Xelos A 42 HD+ 100 Operating Instructions Manual

Daily operation

Adjusting the sound

Switching sound on/off
Sound off;
Sound on: Press button again or set volume V+.
Setting the volume
V+/V– Volume louder / quieter.
The volume bar will be shown briefly if no other menu is
displayed.
Call Sound adjustment
Call Sound adjustment.
Sound adjustment
off
Select sound adjustment by pressing several times.
or:
3 4 S elect sound adjustment.
Other sound settings in volume setting and sound adjustment
➠ As long as the volume bar or the selection of the sound
adjustment is still visible:
 Call additional sound settings.
Volume
24
3 4 S elect sound setting,
6 go to the menu line below.
3 4 M ake changes.
Sound settings via the TV menu
➠ In normal TV mode, without other displays.
Call TV menu.
3 4 S elect Sound,
6 go to the menu line below.
3 4 S elect desired sound setting,
6 go to the menu line below.
3 4 M ake changes.
- 20
...
Speech Classical Pop Custom music sound
Sound effects Sound adjustment Headphone volume
Explanations of the sound settings:
Sound via Playback over the TV speakers, active speakers, Loewe
Auro, Loewe Individual Sound Projector or an external
hi-fi amplifier.
The selection active speakers, hi-fi/AV amplifier or Sound
projector is only possible if these have been logged in in
the audio component wizard. The Auro selection is only
possible if a Loewe DVD Preceiver Auro is connected.
The menu item Sound via does not appear if TV speak-
ers or TV speakers + active subwoofer is set in the audio
components wizard.
Sound effects Set sound effects Stereo, Panorama, 3D Surround. Pano-
rama gives the stereo sound a virtual base widening. 3D
Surround converts a stereo signal into a virtual surround
signal.
Sound Speech, Classical, Pop, Custom music and film sound. You
adjustment can set the treble and bass for music and movie sound.
Headphone Adjust the headphones volume.
volume
Loudness Proper boost of bass and treble tones at low volume.
more ... Call with OK.
Loudspeaker/ Selection possibility Mono/Stereo or Sound 1 or Sound
Headphone 2 for two-sound broadcasts separately for speakers and
sound headphones. Only available with analogue stations.
Auto volume Reduces volume differences, e.g. for advertisements that
are too loud.
END
AV output Sound selection for two sound broadcasts.
signal
Maximum Determining the maximum volume that can be set.
volume
Switch on Specify the volume that is set when switching on the TV
volume set with the power switch.
If the volume when switching off the TV set into standby
mode is higher than specified here, it is automatically
reduced to the fixed switch-on volume when switching
back on.
Volume The volume can differ according to the individual stations.
adjustment for If the sound is too loud or too quiet in relation to other
current station stations, adapt the volume. When the menu is open, you
can select the stations one after another with P+/P– and
adjust every single station conveniently.
Balance Set stereo balance so that the volume impression is identi-
cal on the left and right.