Adjusting The Picture; Operation Without Remote Control - Loewe Xelos A 42 HD+ 100 Operating Instructions Manual

Daily operation
Picture adjustment
You can switch between three fixed picture setting variants and the three
personal picture values that you have set here. Each of the signal input
groups "TV analog", "TV digital", "HD analog", "HD digital", "PC" and

Adjusting the picture

"PhotoViewer" has its own values respectively. Have a look in the printed
user guide.
Call TV menu.
3 4 S elect Picture,
6 go to the menu line below.
TV menu
Picture
Picture adjustment
Presettings (TV digital)
3 4 S elect the desired picture function,
6 go to the menu line below.
3 4 M ake changes.
Explanations of the picture settings:
S witches the picture parameters between personal set-
Picture
adjustment tings and energy efficiency presettings.
Adjust contrast.
Contrast
The power consumption of the TV set is directly depend-
ent on the value set here (see also page 13).
Colour intensity Adjust the colour.
Set warmer or colder tone for picture.
Colour
temperature
Brightness Adjust the brightness of the picture.
Sharpness Adjust the contour sharpness of the picture.
DNC Removes or reduces the signal noise in the picture.
more ... Call with OK.
Image + Active Picture improvement on/off and demo mode for Image +
Active.
Picture format Set picture format (see page 22).
Move picture Move picture vertically (see page 22).
up/down
Auto format Automatic detection and setting of the picture format for
Cinemascope or widescreen movies.
Reduce jolting.
DMM
Automatic The TV picture adapts to the ambient brightness.
The power consumption of the set is reduced in lower
dimmer
ambient brightness.
Presettings / Personal settings for picture adjustment
Call TV menu.
3 4 S elect Picture,
6 go to the menu line below.
3 4 S elect Picture adjustment,
6 go to the menu line below.
INFO END
Contrast Colour intensity Colour temperature
...
TV menu
Picture
Picture adjustment
Presettings (TV digital)
Eco standard
3 4 S elect Presettings or Personal settings.
6 F or presettings, go to the menu line below.
3 4 S elect the desired presetting for the picture.
OK Confirm selection.
Explanations for Picture adjustment:
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise control are saved in the Personal
settings. Every signal source has its own personal settings.
By selecting Presettings the picture settings for the respective currently
active signal source are set to predefined values.
For an explanation of the signal sources see glossary: Signal input groups.
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset
picture/sound or Factory settings picture/sound.

Operation without remote control

Changing the station on the TV set
+ / – Station up/down.
Switching radio on or off or switching to radio
R Radio on or switch between TV and Radio.
Calling the TV menu on the set
M Call Direct control on TV set menu,
Direct control on TV set
AV selection Volume
19
– / + select function.
➠ Service is intended for the customer service.
M or R Go to the menu line below,
– / + make changes.
M Move up one menu line,
– / + select other function.
INFO END
Personal settings (TV digital)
...
Brightness Contrast Picture format Station
21 -