Button Functions - Loewe Xelos A 42 HD+ 100 Operating Instructions Manual

Daily operation

Button functions

Every operating mode of the TV set (TV, Radio, Teletext, EPG, PIP, PhotoViewer
and DR archive, if equipped with Digital Recorder) has its own menu and own
functions for the coloured buttons. The function of the coloured buttons is
shown at the bottom of the menus and wizards. Below, some of the function
are listed which you need in TV mode for the daily handling of your TV set.
Functions of the coloured buttons in TV mode
➠ The coloured buttons do not work as described below
for TV sets with MHEG-5 software, but they operate as
described on page 33 (Digital Teletext).
Red button: Freeze on/off.
In sets with Digital Recorder: DR archive on/off.
For TV sets with MHEG-5 software you can open the DR
archive via the menu Assist + (see page 16).
Green button: Open the Teletext functions menu.
Subtitles Analogue stations:
If you select on, with normal size or on, with double size
the teletext subtitles are displayed accordingly if available.
To hide the subtitles select in the menu Teletext functions
→ Subtitles → off or press the END button.
DVB stations:
The Subtitles menu item is only available when the DVB
station transmits it. In this case you can select your desired
subtitle mode with the OK button.
Personal text Calls the list of your personal teletext pages (see page 33
pages for defining teletext pages).
Yellow button: Go to the last viewed station.
Use this button to quickly switch back and forth between
two stations. For MHEG-5 see page 18 or on this page at
the right lower column.
Blue button: Show programme info.
The programme info of the following programme is
displayed additionally for DVB stations. For MHEG-5, no
programme info is available.
1 ARD
14:30-15:15
Urlaubsparadies Toskana
15:15-15:45
Ägypten
Programme info
Detailed info
Permanent display of time
Press twice in rapid succession:
Time is shown/hidden permanently.
 14:42
- 22
Urlaubsparadies Toskana
Reiseziele dieser Erde
14:43
Detailed info (teletext) Programme preview
OK
Selecting the picture format
Press the Picture format button until the desired picture
format is set or press
3 4 t o select the desired picture format.
The Panorama picture format can be set between
proportionally correct and format filling display. Black
bars are visible on the left and right of the picture in
the prportionally correct display.
Switch: Keep the M button on the TV pressed, at the
same time, press the Picture format button on the remote
control briefly.
Reset: Press the same button combination again.
Explanations of the picture formats:
➠ The setting options depend on the transmitted picture
16:9 Proportionally correct display of 16:9 broadcasts.
4:3 Proportionally correct display of 4:3 broadcasts.
Panorama Proportionally correct or format filling display (as-delivered
state) of 4:3 broadcasts on the 16:9 screen. Station logo
and subtitles remain visible.
See above for switching the Panorama mode.
Cinema Proportionally correct, format filling display of 4:3 broad-
casts on 16:9 screens. Station logo and subtitles usually
not visible.
Zoom Proportionally correct display. Maximum picture magni-
fication.
PALplus Is a 4:3-compatible 16:9 picture broadcast supplied by
the station which is detected automatically.
If a high resolution video signal is displayed on the TV set
or fed in via the interfaces PC IN, HDMI1/DVI, HDMI2/DVI
oder COMP. IN, the picture formats 16:9 TV, 4:3 TV, 16:9
PC and 4:3 PC can be set.
Stereo
Move picture vertically
➠ In normal TV mode without other displays.
 6 M ove picture up/down.
To show subtitles or news tickers which have been cut
off, the picture can be moved up or down in the picture
formats Panorama, Cinema and Zoom (not with high
END
resolution signal) with the arrow buttons 6.
➠ For TV sets with MHEG-5 software you can switch
content.
back and forth quickly between two stations using
these buttons (see also on page 18).