Loewe Xelos A 42 HD+ 100 Operating Instructions Manual page 25

Managing stations
Search for/update stations – handling of new and no longer found stations
After the automatic search/update has been completed, the number of
new found stations is displayed.
OK List of newly found stations.
Search wizard
All stations marked with a  are saved.
Note: The newly found stations which you have already deleted
are not marked.
Search for/update station
Newly found stations
WDR-Köln
EinsFestival
MDR S-ANHALT
Test-R
ARD-Online-Kanal 
ARD-TEST-2
ARD-TEST-1
MDR THÜRINGEN 
Proceed
OK
Page ↑↓
P+
P–
634Select station,
Yellow button: Mark / unmark station
Blue button:
OK saves the marked station.
Afterwards, if available, a list of the stations which are
stored but temporarily not broadcasting or which no
longer exist is displayed.
The number of the used memory location is in front of
the station. Please select the stations you want to delete
permanently.
Search wizard
The following stored stations were no longer found because they are not
currently broadcasting a programme or no longer exist. Please mark those
you want to delete completely. Those not marked are retained.
Search for/update station
Stations no longer found
112 S36
127 Test-R
134 TVOTEXT
142 ARD-Online... 
Proceed
OK
Page ↑↓
P+
P–
634Select station,
Yellow button: Mark / unmark station
Blue button:
OK deletes the selected stations.
END: Exit search wizard.

 
OK
 
 
 


Mark/unmark station
Mark/unmark all
Mark / unmark all
 
 
OK
 
Mark/unmark station
Mark/unmark all
Mark / unmark all
Search/update station – manual search
Call TV menu.
3 4 S elect Settings,
6 go to the menu line below.
3 4 S elect Stations,
6 go to the menu line below.
3 4 S elect Manual adjustment,
Signal source
OK call input box. Select the area in which you want the broadcaster to search here. You can
use the button to automatically select station by station.
You can enter or edit the station data in the following
lines:
Manual adjustment
Signal source
Channel
Frequency
Name
TV stand.
Col. standard
Or:
Blue button: Starts Search and searches for next station.
Red button: Stores station.
➠ Only the stations for the selected signal source are
stored which are not available in the station list.
➠ Stations which are already available for the selected
signal source in the station list are displayed with grey
shaded station number and name. These stations can
only be overwritten with the red button.
Explanations of some search settings:
Various settings are possible depending on the selected signal source.
Some settings have already been explained in the initial installation (see
page 12 onwards).
Signal source Selection of the range in which you want to search for
the station.
Channel Direct input of the channel.
Frequency Direct input of the station frequency.
TV stand. Input of the TV standard of the station,
(B/G, I, L, D/K, M, N).
Ask your dealer in this regard.
Col. standard Input of the colour standard of the station,
(PAL, SECAM, NTSC-V, PAL60, Autom.).
Ask your dealer in this regard.
Antenna/cable (analogue) DVB-T DVB-C
S21
303.25 MHz
KIKA
B/G
Autom.
Store
Search
INFO
D
END
25 -