Connecting Audio Amplifiers - Loewe Xelos A 42 HD+ 100 Operating Instructions Manual

Operating additional equipment

Connecting audio amplifiers

The sound component wizard permits configuration of different audio
amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with
different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM).
See the operating manual for the audio amplifier for more information.
Call TV menu.
3 4 S elect Connections,
6 go to the menu line below.
3 4 S elect Sound components.
OK calls the sound components wizard.
6  M ark the HiFi/AV amplifier.
Sound components
Sound playback via ...
TV speakers
TV speakers + active subwoofer
Active speakers
HiFi/AV amplifier
Sound projector
Sound projector or TV speakers (swichable)
Proceed
OK
OK Proceed.
34 S elect whether the sound is to be transmitted
digitally or analogue to the the amplifier.
Continue, depending on the amplifier, see right column.
Explanations of the setting possibilities:
HiFi/AV Select the setting when an amplifier is connected and the
amplifier TV speakers are not used.
Playback can be switched between TV speakers and
amplifiers in the sound menu after logging in a hi-fi
amplifier under Sound via....
Sound formats Specify sound formats which can be decoded with the
digital amplifier (see operating manual of the used ampli-
fier).
Type of Select either stereo or surround amplifier.
amplifier
TV loudsp. as For every connected surround amplifier, select whether the
centre speaker TV speakers are to be used as centre speakers.
If so, make a connection between the centre output of
the amplifier and the centre input of the TV set AUDIO
IN1 C with a cinch cable.
Attention: Do not use the centre speaker connection of
the amplifier, use the centre pre-amp output instead!
- 48
Connecting digital audio amplifiers

OK
END
Connecting analogue audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select yes.
Connect the digital audio output of the TV set AUDIO
DIGITAL OUT with the digital audio input of the amplifier
via a cinch cable:
AUDIO DIGITAL OUT
PREOUT
AUX1 IN AUX OUT AUX 2
FL C FR
L L
DIGITAL
IN
DIGITAL
OUT
SL SUB SR
R R
Set sound formats, amplifier type and other settings, see
explanations of the setting possibilities (left hand
column).
Continuation of the left column above ...
For digital audio transmission: Select no.
Connect the analogue audio output of the TV device
AUDIO OUT L/R via a stereo cinch cable to the analogue
audio input of the amplifier:
AUDIO OUT L/R
PREOUT
AUX1 IN AUX OUT AUX 2
FL C FR
L L
DIGITAL
IN
DIGITAL
OUT
SL SUB SR R R
Select amplifier type and other settings, see explanations
of the setting possibilities (left hand column).
TV set
Digital amplifier
TV set
Analogue amplifier