About The Setup Menus; List Of Setup Menu - Panasonic WV-CP620/G Series Operating Instructions Manual

About the setup menus

Performing each setting item in the setup menu should be completed in advance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting area.

List of setup menu

Setup item
CAMERA ID This item specifies the camera title. The camera title that indicates the camera location and other information
about the camera is created with alphanumeric characters and symbol, and then displayed on the screen.
Performs the camera operation settings.
CAMERA
Selects a scene file. It is possible to register and save the settings as a scene file in case that it is necessary
SCENE 1/
to change the settings such when shooting at night.
SCENE 2
Selects the method of controlling the quantity of light in accordance with the lens to be used.
ALC/ELC
Specifies the electronic shutter speed.
SHUTTER
Specifies gain adjustment.
AGC
Specifies electronic sensitivity enhancement.
SENS UP
Specifies white balance adjustment.
WHITE BAL
Selects the level of the digital noise reduction function.
DNR
Performs each setting regarding the black-and-white mode such as switching between color and black-and-
D&N (IR/ELE)
white images.
Performs settings regarding VMD (Video Motion Detection)
VMD
SYSTEM Performs the settings regarding the camera system such as synchronization, alarm input/output terminal and
privacy zone.
Only INT method can be used.
SYNC
Performs the settings of the alarm input/output terminal.
ALARM IN/OUT
CP600
CP620
Hides undesired portions in the camera shooting area.
PRIVACY ZONE
Decides whether or not to enable the image stabilizer.
STABILIZER
Switches the electronic zoom on and off.
EL-ZOOM
Flips the camera images vertically or horizontally.
UPSIDE-DOWN
Adjusts the lens distortion correction to convert the image so that it matches the square monitor.
LDC
BACK FOCUS
CF634 CF614
SPECIAL
Adjusts the chroma level (color density).
CHROMA GAIN
Adjusts the aperture level.
AP GAIN
Adjusts the pedestal (brightness) level.
PEDESTAL
Performs the image display setting.
DISPLAY
Corrects image defects such as flaws.
PIX OFF
Performs the communication setting of the system with a receiver into which this unit is integrated.
COMMUNICATION
CP620 CP600
Restores the settings in the setup menu to the default settings.
CAMERA RESET
Displays the serial number of this unit.
SER.NO.
Selects a language to be used in the setup menu.
LANGUAGE
4
Selects the adjustment method and fine adjustment method for back focus.
Description