Scanning - Xerox DocuMate 250 User Manual

Scanning

24
Scanning
If you selected the recommended Full Install option (see page 10),
then you have several different options to scan with your Xerox
DocuMate 250 scanner. Each method scans equally well, so use
the one with appropriate options for the item you are scanning.
NOTE: During installation, the One Touch 4.0 software
searches your computer and links to all the applications (known
as the Destination Applications) where it can send and open
scanned documents. To make sure that all the Destination
Applications are linked to One Touch 4.0, Xerox recommends
that you refresh One Touch 4.0 before using your scanner for the
first time. Please see "Check the Scan Settings Before
Scanning" on page 27 for the steps to Refresh One Touch 4.0.
• Scan Button—When you press the Scan button, documents
are scanned using the current scan settings. The scanned
images are then sent to a software application (known as the
Destination Application) or to a storage folder on your
computer. See "Load and Scan Documents" on page 25.
• One Touch—Use this scan option when you want to scan from
the computer screen. Open the One Touch scan pane, put the
document in the scanner, then click the icon on the One Touch
panel. Also use this One Touch method of scanning if you want
to access the advanced features of Optical Character
Recognition (OCR) available from the OmniPage Pro
application. See "Scan from the One Touch Button Panel" on
page 28.
• TWAIN Interface—This option uses your scanner's TWAIN
interface to scan. Select scanning options before scanning, put
the document in the scanner, then click a button on the TWAIN
interface window. The PaperPort software uses the TWAIN
interface for scanning. See "Scanning with the TWAIN Interface
from PaperPort" on page 81.
• Windows Image Acquisition (WIA)—This option uses the
Microsoft Windows set of choices for scanning. Select the WIA
scan settings, put the document in the scanner, then click a
button on the WIA window. Scanning with WIA is only available
if your computer is running Windows XP. See "Scanning with
the WIA Interface" on page 95.
• ISIS Interface—This option uses the ISIS interface for
scanning. Select the ISIS scan settings, put the document in
the scanner, then click a button on the ISIS window. See
"Scanning with the ISIS Interface" on page 100.
DocuMate 250 Scanner User's Guide