Push Handles; Anti-Tip Devices - Invacare rea Spirea 2 User Manual

1.
2.
A
1-2.
A
6QQN  OO #NNGP MG[
10 mm fixed spanner
Spirea 2

PUSH HANDLES

Adjusting the height of the
push handles
1. To raise or lower the height of the push handles
twist the knob at the same time as you move
the handles to the required height.Tighten once
correct position is achieved.
2. When hole (A) is visible, just above the attachment,
the handle will be in the right "locking-position".

ANTI-TIP DEVICES

The anti-tip device also acts as a step tube. It is height
adjustable and is easy to adjust.
1. Change the plastic plugs on both step tubes to
the ones enclosed. Push the anti-tip device onto
the tube and secure with screw (A) and nut (B).
2. Lift the spring loaded button and select the re-
quired height. Ensure that the anti-tip device
locks into its new position.
Never forget to fold down the anti-tip
devices.
25