Invacare rea Spirea 2 User Manual page 19

6.
7.
G
8.
H
Spirea 2
6. Remove the nut (F) from its groove in the rear
wheel attachment and place it in the new posi-
tion.
F
7. The rear wheel attachment can be placed in two
different positions (see picture). If the brake unit is
to be placed in the lower position (see picture), the
screw with its two casings (D) must be placed in the
upper position (G) on the brake.
D
8. Place the brake unit in its new position and turn the
brake clockwise to screw it into place. Make sure
that that the wire attachment (H) points upwards.
This is important because the screw with both
its casings (D) must fit into its attachment on the
brake.
D
19