Table of Contents
Advertisement
1-2.
B
6QQN
4 mm Allen key
1.
2.
A
1.
26
All manuals and user guides at all-guides.com
Accessories
AMPUTEE LEGREST
A
EXTERNAL PUSH HANDLES
PELVIC BELT
1. Attach the legrests by pushing the tube at the
upper part of the legrests down into the tubes
on the wheelchair. You must angle the legrests
outwards when inserting them.
Lock the legrests by turning them inwards. The
legrests are automatically locked so there is no
risk of them coming off the wheelchair.
2. Loosen screw (A) to adjust the angle of the pad
and its position in depth. Loosen screws (B) to
adjust the height.
When using amputee legrests the balance of
the wheelchair changes. The risk is reduced by
moving the drive wheels backwards. See the
chapter on drive wheel attachment for more
information.
Adjusting the height of the push handles
1. To raise or lower the height of the push han-
dles turn the knob and raise the handles to the
required height.Tighten when the correct posi-
tion is achieved.
2. When hole (A) is visible, just above the attachment,
the handle will be in the right "locking-position".
Make sure the push handles is securely locked
before use.
The pelvic belt is mounted on the brackets placed at
the rear of chassis (Pic 1).
x
INVACARE
®
SPIN
Advertisement
Table of Contents
