Accessories; Amputee Legrest; Tension Adjustable Backrest - Invacare rea Spirea 2 User Manual

1.
B
6QQN  OO #NNGP MG[
1.
2.
6QQN  OO #NNGP MG[
3.
32

Accessories

AMPUTEE LEGREST

A

TENSION ADJUSTABLE BACKREST

A
1. Attach the legrests by pushing the tube at the
upper part of the legrests down into the tubes on
the wheelchair. You must angle the legrests out-
wards when inserting them. Lock the legrests by
turning them inwards. The legrests are automati-
cally locked so there is no risk of them coming off
the wheelchair.
2. 5NCEMGP UETGY #  QP VJG EWUJKQP U OQWPVKPI
KP QTFGT VQ CFLWUV VJG EWUJKQP U CPING CPF FGRVJ
Slacken screws (B) in order to adjust the cushion
height.
Warning Tip risk
There is an increased risk of tipping for
CORWVCVGF WUGTU 7UG CPVKVKRRGTU CPFQT
re-balance the wheelchair when amputee
legrests are used
Adjustment of backrest
1. Detatch the left hand side of the back brace by
depressing the catch on the inside of the left hand
bracket and then rotate the brace downwards.
Fold the chair slightly by taking hold of the the
seat and pulling upwards. Then loosen and fold the
backcloth forward, so that it rests on the seat.
2. Slacken and remove the screws (A) on the rear of
the back tube, using an Allen key. It is now possible
to raise or lower the back.
3. Adjust the shape of the backrest by adjusting the
six Velcro straps.
The user should be seated in the chair when
adjusting the Velcro straps. When adjustment is
complete fold the backcloth back into position and
secure it with the Velcro straps.
Spirea 2