Suspend Timeout - Honeywell 8650 User Manual

Suspend Timeout

To improve battery life, the Suspend timeout can be adjusted by scanning the following bar codes.
A trigger press is required to wake the module from Suspend.
Note: After the trigger press (to wake the module from Suspend) another trigger press is needed to scan a bar code.
Disable Suspend Timeout
Set Suspend Timeout to 15 seconds
Set Suspend Timeout to 30 seconds
Set Suspend Timeout to 1 minute
* Set Suspend Timeout to 5 minutes
Set Suspend Timeout 15 minutes
3 - 4