Composite Tlc-39; Upc Composite Mode - Honeywell 8650 User Manual

Composite TLC-39

Scan one of the following bar codes to enable or disable Composite bar codes of type TLC-39.
Enable Composite TLC-39
* Disable Composite TLC-39

UPC Composite Mode

UPC symbols can be linked with a 2D symbol during transmission as if they were one symbol. There are three options for
these symbols:
UPC Never Linked
UPC Always Linked
Autodiscriminate UPC Composites
UPC Never Linked
* UPC Always Linked
Autodiscriminate UPC Composites
UCC/EAN Code 128 Emulation Mode
5 - 70
Transmit UPC bar codes regardless of whether a 2D symbol is detected.
Transmit UPC bar codes and the 2D portion. If 2D is not present, the UPC bar
code does not transmit.
The decoding engine determines if there is a 2D portion, then transmits the
UPC, as well as the 2D portion if present.