Decode Aiming Pattern; Decoding Autoexposure - Honeywell 8650 User Manual

Decode Aiming Pattern

Note: This parameter only applies when in Decode Mode. See
Note: Scan Enable Decode Aiming Pattern to project the aiming pattern during bar code capture, or Disable Decode Aiming
Pattern to turn the aiming pattern off.
* Enable Decode Aiming Pattern
Disable Decode Aiming Pattern

Decoding Autoexposure

Select Enable Autoexposure to allow the imager to control gain settings and exposure (integration) time to best capture an
image for the selected operation mode.
Select Disable Autoexposure to manually adjust the gain and exposure time (not supported in this version). This option is
only recommended for advanced users with difficult image capture situations.
* Enable Decoding Autoexposure
Disable Decoding Autoexposure
Operational Mode (page 5-11)
5 - 7