Convert I 2 Of 5 To Ean 13; Discrete 2 Of 5 (Dtf) - Honeywell 8650 User Manual

Convert I 2 of 5 to EAN 13

A successful bar code conversion requires the following to be true:
Interleaved 2 of 5 scanning is enabled.
• One of the I 2 of 5 lengths is set to 14.
• The bar code has a leading zero.
• The bar code has a valid EAN-13 check digit.
When enabled, the parameter converts a 14 character I 2 of 5 bar code into EAN-13 and transmits it to the host as EAN-13.
Set this parameter by scanning either of the bar codes shown below.
Enable Convert I 2 of 5 to EAN-13
* Disable Convert I 2 of 5 to EAN-13

Discrete 2 of 5 (DTF)

When enabled, Discrete 2 of 5 (D 2 of 5) symbols will be scanned, decoded and transmitted.
Set this parameter by scanning either of the bar codes shown below.
Enable Discrete 2 of 5
* Disable Discrete 2 of 5
5 - 53