Decoding Illumination - Honeywell 8650 User Manual

Decoding Illumination

Note: When this parameter is disabled, any LED Illumination parameter setting is ignored.
Note: The decoder has three small bright LEDs situated above the scan aperture.
Note: Enable this parameter for LED illumination upon every decode. The effectiveness of the illumination decreases as
the distance to the target increases.
Disable this parameter to prevent LED illumination.
See LED Illumination
Select a setting by scanning one of the bar codes shown below.
* Enable Illumination
Disable Illumination
5 - 8
(page 5-10).