User-Programmable Supplementals; Decode Upc/Ean Supplemental Redundancy - Honeywell 8650 User Manual

Smart Supplemental Plus User Programmable 1
and 2

User-Programmable Supplementals

When Supplemental User-Programmable option is selected from Decode UPC/EAN Supplementals, select User-
Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the
Symbols (page 4-72).
User-Programmable Supplemental 1
User-Programmable Supplemental 2
When Supplemental User-Programmable option is selected from Decode UPC/EAN Supplementals, select User-
Programmable Supplemental 2 to set the 3-digit prefix. Then select the 3 digits using the
Symbols (page 4-72).

Decode UPC/EAN Supplemental Redundancy

Default: 7 Times
With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number of times a symbol
without supplementals will be decoded before transmission. The range is from 2 to 20 times. Five or above is
recommended when decoding a mix of UPC/EAN symbols with and without supplementals, and the
autodiscriminate option is selected.
To begin setting the decode redundancy value, scan this bar code:
Next, scan two numeric bar codes that correspond to the desired value using the
4-72). Single digit numbers must have a leading zero.
If you wish to change your selection, scan Cancel on the Keypad Number Symbols page.
4 - 64
Keypad Number
Keypad Number
Keypad Number Symbols (page