Adjusting The Footboard Assembly Depth; Adjusting The Footboard Assembly Height; Center-Mounted Legrests - Manually Adjustable; Removing The Leg Rest - Invacare Pronto M41 Series User Manual

Invacare® Pronto™ M41 Series with SureStep®

5.8.3 Adjusting the footboard assembly depth

WARNING!
Make sure the detent balls of the quick-release
pin are fully released beyond the outer edge
of the tube before operating the wheelchair.
Otherwise, injury and/or damage may result.
– Keep detent balls clean.
1. Remove the quick release pin C that secures the footboard
assembly A to the wheelchair frame.
2. Adjust footboard to one of three mounting positions F.
Install the quick release pin. Make sure the detent balls B are
3.
engaged with the outer edge of the tube E (Detail "A").
40
Detail "A"

5.8.4 Adjusting the footboard assembly height

1. Remove the quick release pin that secures the footboard
assembly to the wheelchair frame.
2. Remove the mounting bolt A, sleeve D, and locknut C that
secures the footboard B to footboard support bracket F.
Align the footbard to one of the mounting holes E on the
3.
footboard support bracket.
4. Secure the footboard to the footboard support bracket with the
mounting bolt, sleeve and locknut. Securely tighten.
5.9 Center-mounted legrests — manually
adjustable
Electric
– Please consult the user manual for your remote for
information about electrical adjustment.

5.9.1 Removing the leg rest

You can remove the central, manually adjustable leg rest completely.
1553378-C