Invacare® Pronto™ M41 Series with SureStep®
1.
Loosen the two lock knobs A that secure the arms C to the
arm support tube B.
•
Both arms should be adjusted to the same distance
away from the arm support tube.
•
Changing the width of the arms may also affect the
overall width of the wheelchair.
2.
Reposition the arms until desired width is achieved.
3.
Securely tighten the two lock knobs that secure the arms to
the arm support tube.
5.5.2 Adjusting the armrest angle
CAUTION!
Pinch point may occur when adjusting the arm
angle
– Pay attention to your fingers.
1.
Lift up the armrest.
Loosen the jam nut A.
2.
Adjust the socket screw B up or down to the desired arm angle
3.
position.
4.
Tighten the jam nut.
5.
To determine the same angle for the opposite armrest, count
the exposed threads after the jam nut has been tightened.
6.
Repeat STEPS 1-4 for opposite armrest, if necessary.
36
5.5.3 Adjusting the armrest height
Remove the lock knob A that secures the armrest C to the
1.
arm frame assembly B.
Adjust the armrest to one of five positions D.
2.
3.
Reinstall the lock knob that secures the armrest to the arm
frame assembly and tighten securely.
5.5.4 Adjusting the backrest angle
Lift up on the release handle A and adjust seat to desired angle.
1.
2.
Let go of the release handle to lock the backrest in position.
1553378-C