Adjustment Possibility For Remote; Adjusting The Remote For The Length Of The User's Arm (All Seat Systems) - Invacare Pronto M41 Series User Manual

Invacare® Pronto™ M41 Series with SureStep®
CAUTION!
Damage to mobility device and accident hazard
It is possible that collisions can occur between mobility
device components due to various combinations of
adjustment options and their individual settings
– The mobility device is fitted with an individual,
multiply adjustable seating system including adjustable
legrests, armrests, a headrest or other options. These
adjustment options are described in the following
chapters. They are used to adapt the seat to the
physical requirements and the condition of the user.
When adapting the seating system and the seat
functions to the user, ensure that no mobility device
components collide.
Electrical adjustment options
– Please refer to the user manual for your remote for
more information on operating electrical adjustment
options.

5.2 Adjustment possibility for remote

The following information is valid for all seating systems.
24
CAUTION!
Risk of the remote being pushed backwards
during an accidental collision with an obstacle,
such as a doorframe or table, and the joystick
being jammed against the armpad if the position
of the remote is adjusted and all screws are not
completely tightened
This will cause the mobility device to drive forward
uncontrollably and potentially injure the mobility device
user and any person standing in the way.
– When adjusting the position of the remote, always
make sure to tighten all screws securely.
– If this should accidentally happen, immediately switch
the mobility device electronics OFF at the remote.
5.2.1 Adjusting the remote for the length of the
user's arm (all seat systems)
Loosen wing bolt A.
1.
2. Shift the remote forwards or backwards to the desired distance.
3. Retighten the bolt.
1553378-C