Setting The Angle Of The Footplate; Setting The Height And Width Of The Calf Pad - Invacare Pronto M41 Series User Manual

3. Release the nuts B at the side of the legrest.
It may be necessary to remove the nuts and move them from
one slot to the other.
4. Set the desired length.
5. Retighten the nuts.
6. Refit the calf pads and cover and retighten the screws.

5.10.2 Setting the angle of the footplate

Tools:
•
5/32'' (4 mm) Allen key
1. Fold the footplates up in order to access the adjusting screws (1).
2. Set the adjusting screws using the Allen key.
3. Fold the footplate down again.

5.10.3 Setting the height and width of the calf pad

Calf pads may be adjusted independently on their respective mounting
bracket using the mounting screws at the rear of the calf pads. Calf
pads may be adjusted (for depth, height & angle) to achieve a variety
of different configurations. The independent pad adjustments provide
optimal positioning and comfort for end users - sample configurations
are illustrated below.
1553378-C
Adjusting the mobility device to the user's seating posture
Calf pad adjustment — sample configurations
Centered Extended Lowered
Position Offset
(maxi-
mum)
Tools:
•
3/16'' (4 mm) Allen key
1. Fold the calf pad forward in order to access the bolts.
2. Loosen the bolts and remove them if necessary.
3. Adjust the calf pad to the required height and width.
4. Retighten the bolts.
5. Fold the calf pad back.
Raised Angled
Offset
43