Seatalk Ng Connections - Raymarine gS Series Installation And Operation Instructions Manual

4.18 SeaTalk ng connections
The display can connect to a SeaTalk
The display can use SeaTalk
• SeaTalk ng instruments (for example, i70).
• SeaTalk ng pilot control head (for example, p70).
• SeaTalk ng autopilots (for example, Evolution
autopilots or SmartPilot SPX course computer).
• SeaTalk equipment via the optional SeaTalk to
SeaTalk ng converter.
• NMEA 2000 equipment via optional DeviceNet
adaptor cables.
Typical SeaTalk ng system
1
3
9
10
1. SeaTalk ng instrument — for example, i70.
2. SeaTalk ng pilot control head — for example, p70.
3. iTC-5 converter.
4. Wind transducer.
5. Multifunction display.
6. Actuator Control Unit (ACU).
7. EV unit.
8. SeaTalk ng 5 Way block.
64
ng network.
ng to communicate with:
2
5
6
8
11
9. iTC-5 converter.
10. Depth transducer.
11. Speed transducer.
SeaTalk ng power requirements
The SeaTalk ng
Power may be provided from:
• Raymarine equipment with a regulated 12 V power
supply (for example, a SmartPilot SPX course
computer); or:
• Other suitable 12 V power supply.
Note: SeaTalk
multifunction displays and other equipment with a
dedicated power supply input.
4
7
D12910-1
bus requires a 12 V power supply.
ng does NOT supply power to
gS Series