Removing A Memory Card Or Chart Card; Saving User Data And User Settings - Raymarine gS Series Installation And Operation Instructions Manual

8.3 Removing a memory card or chart
card
From the homescreen:
1. Select My Data.
2. Select Eject Card.
A message is displayed prompting you to select
the memory device you want to eject.
3. Select SD1 for a memory card in the top card slot,
or SD2 for a memory card in the bottom card slot.
4. Open the card reader door.
5. Push the edge of the card towards the unit, until
an audible click is heard.
The card is released from the card slot
mechanism, as shown in the following diagram:
1
6. Use your fingers to pull the card clear of the card
slot, using the edge of the card.
1
7. To prevent the ingress of water and consequent
damage, close the chart card door.
Note: You can also power off the multifunction
display and follow steps 4 to 7 above.
Managing display data
2
D12923-1
2
D12924-1

8.4 Saving user data and user settings

You can save your waypoints, routes, tracks and
user settings to a memory card. Waypoints, routes
and tracks are saved as gpx data files. The gpx file
format is a device-independent data format making
it easy to exchange data between your display and
other GPS devices / software that support the gpx
file format.
Type of data Description
Waypoints (user Each waypoint
data) group can be
saved separately
Routes (user data) Each route can be
saved separately
Each track can be
Tracks (user data)
saved separately
User settings Saves the settings
you've made in the
set-up menus to a
single archive file.
Note: It is recommended that you save your user
data and user settings to a memory card on a
regular basis.
Note: Do NOT save user data or settings to a
chart card containing cartography.
Saving all user data to a memory card
You can save all user data to one archive file.
With the Homescreen displayed:
1. Ensure you have a memory card (NOT a chart
card) inserted into a card slot.
2. Select My Data.
3. Select Import/Export.
4. Select Save Data to Card.
5. Select Save All.
The on-screen keyboard is displayed.
6. Using the on-screen keyboard enter the filename
you want to save the file as.
7. Select SAVE.
If your display has more than 1 card slot then a
message is displayed prompting you to select the
slot you want to save data to, if your display only
has 1 card slot then you will not be prompted.
8. Select SD1 for a memory card in the top card slot,
or SD2 for a memory card in the bottom card slot.
A confirmation dialog is displayed.
9. Select OK.
Saving waypoints to a memory card
With the Homescreen displayed:
1. Ensure you have a memory card (NOT a chart
card) inserted into a card slot.
2. Select My Data.
3. Select Import/Export.
4. Select Save Data to Card.
Notes
Only 1 user
settings archive
file can be saved
per memory card.
113