Nmea 2000 Connection; Seatalk Connection - Raymarine gS Series Installation And Operation Instructions Manual

4.19 NMEA 2000 connection

The display can receive data from NMEA 2000
devices (e.g. data from compatible engines). The
NMEA 2000 connection is made using SeaTalk
and appropriate adaptor cables.
You can EITHER:
• Use your SeaTalk ng
NMEA 2000 device on a spur, OR
• connect the display on a spur into an existing
NMEA 2000 backbone.
Important: You cannot have 2 backbones
connected together.
Connecting NMEA 2000 equipment to the
SeaTalk ng backbone
1
12V
2
1. 12 V supply into backbone.
2. SeaTalk ng backbone.
3. SeaTalk ng to DeviceNet adaptor cable.
4. NMEA 2000 equipment.
Connecting the display to an existing NMEA 2000
(DeviceNet) backbone
1. Multifunction display.
2. SeaTalk ng to DeviceNet adaptor cable.
3. DeviceNet backbone.
4. NMEA 2000 equipment.
Cables and connections
backbone and connect each
NMEA 2000
ng
SeaT alk
1

4.20 SeaTalk connection

You can connect SeaTalk devices to your
multifunction display using the optional SeaTalk to
ng SeaTalk ng converter.
1
4
1. SeaTalk device.
2. SeaTalk to SeaTalk
3. Multifunction display.
3
D1291 1-1
D12912-1
3
2
ng converter.
ng
SeaT alk
D12913-1
65