Initiating Basic Setting - Skoda Octavia Workshop Manual

OCTAVIA
Test of vehicle systems
Select function XX
Basic setting
Enter display group number XXX
System in basic setting
Test of vehicle systems
Select function XX
Edition 04.00
S00.5116.58.20
Self-Diagnosis/Electrical Test

Initiating basic setting

Note:
The basic setting must be carried out after the
following repairs:
♦ Replacing engine
♦ Replacing engine control unit
♦ Replacing throttle valve control unit -J338
♦ Replacing gearbox control unit -J217
♦ Replacing clutch and control valve body
♦ Removing and installing gearbox
Requirements:
l Voltage supply o.k. and all electrical components
switched off.
l Throttle mechanism correctly set.
l Fault memory interrogated, any faults rectified
and fault memory erased.
- Connect vehicle system tester V.A.G 1552
⇒ page 01-4.
Note:
Accelerator pedal must remain in idling position.
K Readout in display:
HELP
- Press key 04 and confirm the entry with the
key Q.
K Readout in display:
HELP
- Press key 0 three times and confirm the en-
try with the key Q.
0 → K Readout in display:
The system is now in the basic setting.
- Depress accelerator pedal fully and hold in
this position for 3 seconds.
- Press → key.
K Readout in display:
HELP
01
------------ 01-15 ------------