Pptp - D-Link DIR-605L User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.

PPTP:

Select Dynamic (most common) or Static. Select Static if
your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
IP Address:
Enter the IP address (Static PPTP only).
Subnet Mask:
Enter the primary and secondary DNS server addresses
(Static PPTP only).
Gateway:
Enter the gateway IP address provided by your ISP.
Primary DNS
The DNS server information will be supplied by your ISP
Server:
(Internet Service Provider.)
MAC Address:
The default MAC address is set to the WAN's physical
interface MAC address on the broadband router. It is not
recommended that you change the default MAC address
unless required by your ISP.
You can use the Copy.Your.PC's.MAC.Address button to
copy the MAC address of the Ethernet card installed by your
ISP and replace the WAN MAC address with the MAC address
of the router. It is not recommended that you change the
default MAC address unless required by your ISP.
Server IP:
Enter the server IP address provided by your ISP (optional).
PPTP Account:
Enter your PPTP account name.
D-Link DIR-605L User Manual
Internet Setup
PPTP
18