Advanced; Advanced Port Forwarding Rules - D-Link DIR-605L User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports. Click Save.Settings to apply your settings.
Rule: Check the box to enable the rule.
Name: Enter a name for the rule. You can also choose from the
Application.Name drop-down box.
IP Address: Enter the IP address of the computer on your local network
that you want to allow the incoming service to. You can also
choose from the Application Name drop-down box.
Public Port/ Enter the port or range of ports that you want to open. If you
Private Port: want to open one port, enter the same port in both boxes.
Traffic Type: Select TCP,.UDP, or Any.to specify the protocol.
D-Link DIR-605L User Manual

Advanced

Advanced Port Forwarding Rules

32