Pptp - D-Link DIR-840 User Manual

Wireless n600 vpn router

Table of Contents

Section 3 - Configuration

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username

and password. This option is typically used for DSL services.

My Internet

Connection:

Select PPTP.(Username/Password) from the drop-down menu.

Address Mode:

Select Static if your ISP assigned you the IP address, subnet mask,

gateway, and DNS server addresses. In most cases, select Dynamic.

PPTP IP Address:

Enter the IP address (Static PPTP only).

PPTP Subnet

Enter the Primary and Secondary DNS Server Addresses (Static PPTP

Mask:

only).

PPTP Gateway:

Enter the Gateway IP Address provided by your ISP.

PPTP Server IP:

Enter the Server IP provided by your ISP (optional).

Username:

Enter your PPTP username.

Password:

Enter your PPTP password and then retype the password.

Reconnect Mode:

Select either Always-on, On-Demand, or Manual.

Maximum Idle

Enter a maximum idle time to maintain the Internet connection

Time:

during inactivity. To disable this feature, enable Auto-reconnect.

DNS Servers:

The DNS server information will be supplied by your ISP (Internet

Service Provider.)

MTU:

Maximum Transmission Unit - you may need to change the MTU for

optimal performance with your specific ISP. 1400 is the default MTU.

D-Link DIR-840 User Manual

PPTP

Table of Contents