Table of Contents
Advertisement
5.6.3.5 Adjusting the room temperature set point
Turn the setting knob to increase or decrease the Comfort set point
For the Reduced set point
Press the OK button
Choose operating page "Heating circuit" and
Adjust the "Reduced set point"
Each time you make a readjustment, wait at least 2 hours, allowing the room temperature
to adapt.
5.6.3.6 Occupancy Button
If the rooms are not used for a certain period of time, you can press the occupancy button to
reduce the room temperature, thus saving heating energy.
When the rooms are occupied again, press again the occupancy button to resume heating
operation.
Heating to the Comfort set point
Heating to the Reduced set point
• The occupancy button is only active in automatic mode
• The current selection is active until the next switching action according to the heating
program occurs
5.6.3.7 Displaying information
The Info button is used to display information.
Available information
Navien stirling engine m-CHP installation manual
Certain information lines are hidden, depending on the type of unit, unit
.
67 of 88
Page No:
Advertisement
Table of Contents
