Table of Contents
Advertisement
4.9.5 KD NAVIEN external control options
The KD NAVIEN appliance may be configured for use with wired and wireless external controls
which are manufactured by SIEMENS.
The wired option requires connections to be made inside the appliance controls enclosure for each
wired device. Wired devices take their power from the appliance.
The wireless option requires only a single transceiver to be wired into the controls enclosure.
External wireless control devices communicate with the transceiver by radio and are either
powered from batteries or separate low voltage power adapters.
For some installations a combination of wired and wireless devices may be appropriate.
The list below details the external control devices available. Further technical details of each
device may be found in the appendices and on the information sheets supplied in the device
packaging.
It is recommended that you familiarise yourself with the capabilities of the control devices
prior to installing and configuring the control options.
Select one of the following room comfort control options:
a) Wired basic room temperature controller QAA55.110
b) Wired sophisticated room unit QAA75.610 (unlit) or QAA75.611 (with backlight)
Navien stirling engine m-CHP installation manual
45 of 88
Page No:
Advertisement
Table of Contents
