Table of Contents
Advertisement
4.9.3 Accessing the Controller Assembly
Accessing the Controller Assembly
1. Remove the 2 screws from the
1. Remove the 2 screws from the bottom of the appliance.
2.
2.
2.
Unlatch all the clips, and pull up the hooks (2 on the top and 2 on the bottom of the
Unlatch all the clips, and pull up the hooks (2 on the top and 2 on the bottom of the
Unlatch all the clips, and pull up the hooks (2 on the top and 2 on the bottom of the
appliance).
3. Lift off the front panel from the wall mounted unit.
3. Lift off the front panel from the wall mounted unit.
4. Remove the 3 screws on the underside of the controller assmbly,
screws on the underside of the controller assmbly, then pull the controller
screws on the underside of the controller assmbly,
assmbly downward.
5. Remove the screw on the controller cover
Remove the screw on the controller cover.
Before removing the controller cover
CONTROLLER on the edge of the FASCIA CONTROLLER PCB inside the
CONTROLLER on the edge of the FASCIA CONTROLLER PCB inside the
CONTROLLER on the edge of the FASCIA CONTROLLER PCB inside the controller cover and
sliding it off the PCB by hand. Push the connector away from the PCB edge to release it.
sliding it off the PCB by hand. Push the connector away from the PCB edge to release it.
sliding it off the PCB by hand. Push the connector away from the PCB edge to release it.
Navien stirling engine m-CHP installation manual
the controller cover, disconnect white edge connector socket
CHP installation manual
isconnect white edge connector socket of the FASCIA
42 of 88
Page No:
Advertisement
Table of Contents
