Table of Contents
Advertisement
4.9.4 Accessing All the Electricity Connections
Accessing All the Electricity Connections
Isolate the main electrical supply before starting any work and check all relevant safety
Isolate the main electrical supply before starting any work and check all relevant safety
Isolate the main electrical supply before starting any work and check all relevant safety
precautions
Short circuiting risk: When connecting the cables, ensure that no pieces of cable fall into
the electrical and electronic connections.
the electrical and electronic connections.
1. Release cap "A" of the grand cable which is located at the bottom
1. Release cap "A" of the grand cable which is located at the bottom
of the appliance.
2. Remove the black silicone tube "B" from the cable gland.
2. Remove the black silicone tube "B" from the cable
3. Insert wire "C" into cap "A" and the silicone tube "B".
3. Insert wire "C" into cap "A" and the silicone tube "B".
Navien stirling engine m-CHP installation manual
Diagram 4.9 Accessing the Controller Assembly
Diagram 4.
connecting the cables, ensure that no pieces of cable fall into
connecting the cables, ensure that no pieces of cable fall into
CHP installation manual
43 of 88
Page No:
Advertisement
Table of Contents
