Table of Contents
Advertisement
5.5.1 Starting the appliance
1) Check that all heating system drain cocks are closed and any valves in the flow and return
are open.
2) Check that the gas valve is open.
3) Check that the electrical supply is OFF at the securable isolator and the consumer unit.
4) Carry out gas soundness tests on the product
5) Turn on the appliance and use the commissioning function on the programmer. The flue
gas sampling point is shown in diagram 5.3
Diagram 5.3 Flue sampling point
Navien stirling engine m-CHP installation manual
Sampling point
Page No:
54 of 88
Advertisement
Table of Contents
