Assembly Instructions - Stamina 1333 Precision Power Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the REAR STABILIZER(8) to the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x90mm)(46)
and NYLOCK NUTS(M8x1.25)(36).
STEP 2
Please verify the two SPACERS(3) have already been assembled onto each side of the SHAFT which on
the front of the MAIN FRAME(1) at the factory. Place a PEDAL CAP(4) onto each end of the SHAFT and
secure with WASHERS(ø8xø23x2mm thick)(33) and NYLOCK NUTS(M8x1.25)(36).
7
Shaft